A garage door spring plays a crucial role in the smooth functioning of your garage door. It counterbalances the weight of the door, making it easier to open and close. However, due to constant use, springs can lose tension and need to be rewound. Attempting to rewind a garage door spring without proper knowledge and precautions can be dangerous, as these springs are under high tension.
This guide will walk you through the process of safely rewinding a Garage Door Repair Hewitt TX spring step-by-step.
Disclaimer:
Before proceeding, it’s essential to note that working with garage door springs can be hazardous and should ideally be left to trained professionals. Mishandling springs can lead to severe injuries or even fatalities. If you are unsure or uncomfortable with the process, it is best to hire a professional garage door technician.
Tools and Equipment:
Ensure you have the following tools and equipment before attempting to rewind the garage door spring:
- C-clamps or Vise Grips
- Safety Glasses
- Gloves
- Winding Bars
- Tape Measure
- Ladder (if needed)
- Partner (recommended)
Step-by-Step Guide:
- Gather Information: Before starting the process, identify the type and size of the garage door spring you have. There are two main types: torsion springs (mounted above the door) and extension springs (located on the sides). Torsion springs can be particularly dangerous due to the high tension involved.
- Prepare the Area: Clear any clutter or obstacles around the garage door to ensure a safe working environment. Also, make sure the door is closed before proceeding.
- Release Tension from the Spring: If you have a torsion spring, it’s essential to release the tension before attempting to rewind it. This is done by placing C-clamps or Vise Grips on the track just below the bottom roller to prevent the door from moving. Then, using winding bars in the winding cone, carefully unwind the tension until the spring is fully relaxed.
- Measure the Existing Spring: If you’re rewinding an extension spring, you’ll need to measure the length of the existing spring (without tension) to ensure you have the correct replacement.
- Purchase the Right Replacement: Contact a reputable garage door supplier or manufacturer to purchase the correct replacement spring based on your measurements and door specifications.
- Secure the Door: Once you have the replacement spring, secure the garage door in place using C-clamps or Vise Grips on both sides of the door track. This prevents the door from accidentally falling during the rewinding process.
- Attach the New Spring: For extension springs, carefully remove the old spring and attach the new one to the track hanger and the pulley system. Follow manufacturer guidelines and ensure the spring is securely in place.
- Rewind Torsion Springs: If you’re dealing with a torsion spring, place the new spring on the torsion tube and follow the manufacturer’s instructions for winding. Typically, you’ll use winding bars to apply tension to the spring. Be extremely cautious during this step, as torsion springs hold a significant amount of energy.
- Balance the Door: Once the spring is rewound, carefully remove the C-clamps or Vise Grips from the door track, allowing the door to rest on the spring’s tension. Test the door by opening and closing it manually to ensure it’s balanced.
- Test the Automatic Opener (if applicable): If your garage door is equipped with an automatic opener, test it to make sure it works correctly with the newly rewound spring.
Safety Precautions:
- Always wear safety glasses and gloves when working with garage door springs.
- Use proper tools, such as winding bars, to avoid injury.
- Never attempt to rewind or adjust a torsion spring without fully releasing its tension first.
- If you are unsure about any step of the process, consult a professional garage door technician.
Conclusion:
Rewinding a Garage Door Repair Hewitt TX spring can be a challenging task that requires proper knowledge and precautions. Safety should always be the top priority. If you have any doubts about your ability to perform this task safely, it is best to seek the assistance of a trained professional. Remember that garage door springs are under high tension and mishandling them can lead to serious injuries.
McClellan County Garage Doors & Gates
508 Connie Dr #12, Hewitt, TX 76643, United States
1-254-232-5658