Category: Window Replacement

Proper maintenance and regular cleaning are essential to ensure the longevity, functionality, and aesthetic appeal of your Hurst Siding & Windows Expert. Whether you have just installed new windows or want to extend the lifespan of your existing ones, following a routine maintenance and cleaning schedule can keep your windows looking and performing their best.

In this comprehensive guide, we’ll provide detailed instructions on how to maintain and clean your replacement windows effectively.

Maintenance Tips for Replacement Windows:

1. Inspect Regularly: Conduct visual inspections of your windows at least once or twice a year. Look for signs of wear, damage, or deterioration, such as cracked glass, damaged frames, or broken seals. Address any issues promptly to prevent further damage.
2. Operate Windows Periodically: To prevent windows from becoming stuck due to dust or debris buildup, open and close them periodically, even during seasons when you may not need to use them frequently.
3. Clean and Lubricate Hardware: Check the window hardware, including locks, hinges, and cranks, for smooth operation. Clean hardware with a soft cloth and apply a silicone-based lubricant to ensure ease of use.
4. Clear Debris and Obstructions: Keep the window tracks and sills free of dirt, leaves, insects, and other debris. Use a vacuum cleaner attachment or a soft brush to remove particles that can impede proper window function.
5. Seal Gaps and Caulk: Inspect the seals and weatherstripping around your windows. If you notice any gaps or deterioration, replace the weatherstripping or apply fresh caulk to maintain an airtight seal. Proper sealing enhances energy efficiency.
6. Check for Condensation: Excess condensation on your windows can lead to moisture-related issues, such as mold and mildew growth. Ensure proper ventilation and consider using a dehumidifier to reduce indoor humidity levels.
7. Trim Vegetation: Trim any overhanging tree branches or shrubs near your windows to prevent them from scratching or damaging the glass or frames during windy conditions.
8. Clean Window Wells: If you have basement windows with window wells, periodically remove leaves, debris, and water to prevent water infiltration and damage to your windows.

Cleaning Your Replacement Windows:

Regular cleaning not only keeps your windows looking their best but also helps maintain their functionality and performance. Here’s a step-by-step guide on how to clean your replacement windows effectively:

Tools and Supplies Needed:

• Soft-bristle brush or duster
• Bucket of warm, soapy water (mild dish soap)
• Squeegee or microfiber cloth
• Soft, lint-free cloths or paper towels
• Glass cleaner (ammonia-free is recommended)
• Vinegar and water solution (optional)

Step-by-Step Cleaning Process:

1. Remove Dust and Debris:

• Start by using a soft-bristle brush or duster to remove dust, cobwebs, and loose dirt from the window frames, sills, and tracks. Pay special attention to corners and crevices.

1. Prepare Cleaning Solution:

• Fill a bucket with warm water and add a few drops of mild dish soap. Mix the solution until it creates a soapy mixture. Alternatively, you can use a vinegar and water solution by combining equal parts water and white vinegar.

1. Wash the Glass:

• Dip a soft cloth or sponge into the soapy water solution and wring it out until it’s damp but not dripping.
• Gently wash the window glass from top to bottom using a horizontal or vertical motion. Avoid using abrasive materials or harsh chemicals that can scratch the glass or damage coatings.
• For stubborn stains or spots, use a glass cleaner or the vinegar and water solution applied with a microfiber cloth. Ensure the cleaning product is ammonia-free, as ammonia can damage some window coatings.

1. Squeegee or Wipe Dry:

• After washing, immediately use a squeegee or a clean, dry microfiber cloth to wipe the glass from top to bottom in a single, smooth motion. This prevents streaks and water spots.
• If using a squeegee, start at the top and pull it down in a straight line, wiping the blade between each pass.
• Alternatively, use a lint-free cloth or paper towels to dry the glass thoroughly.

1. Clean Frames and Tracks:

• Dip a separate cloth or sponge into the soapy water solution and clean the window frames, sills, and tracks. Pay attention to any dirt or debris buildup.
• Rinse the cloth or sponge frequently to avoid transferring dirt back onto the surfaces.

1. Rinse and Polish:

• If you used a soapy water solution, rinse the frames, sills, and tracks with clean water to remove any soap residue.
• Once everything is clean and dry, you can optionally apply a glass polish to the window glass for added shine and protection.

1. Reassemble and Test:

• Reassemble any hardware or accessories you removed during the cleaning process, such as screens or window treatments.
• Operate the windows to ensure they open and close smoothly and lock securely.

Additional Tips:

• Avoid cleaning windows in direct sunlight, as the sun can cause cleaning solutions to dry too quickly, leading to streaks.
• Use a dedicated cloth or paper towels for cleaning glass to prevent lint or debris transfer.
• For multi-pane windows with grilles, clean between the panes with a vacuum cleaner attachment or a specialized tool.
• If you have windows that are difficult to reach, consider using an extendable window cleaning tool or hiring professional window cleaners for occasional deep cleaning.

By following these maintenance and cleaning tips, you can keep your Hurst Siding & Windows Expert in excellent condition, ensuring their longevity and optimal performance while maintaining a clear and beautiful view of the outside world.

Hurst Siding & Windows Expert

1625 El Camino Real #249, Hurst, TX 76053, United States

1-817-382-3468