Garage Door Repair Oklahoma City OK Over time, friction and wear can cause the rollers to become stiff and noisy, making it difficult for the door to open and close properly.
By greasing the rails regularly, you can reduce friction, prolong the life of the rollers, and keep your garage door operating smoothly. Here’s a detailed guide on how to grease garage door rails:
1. Gather Materials and Tools: Before you begin, gather the necessary materials and tools for greasing the garage door rails. You will need a can of white lithium grease or silicone-based lubricant, a clean rag or cloth, and a step ladder or stool to access the rails.
2. Prepare the Area: To prevent any mess or damage, lay down a drop cloth or old newspaper beneath the garage door rails. This will catch any excess grease or drips and protect the floor or driveway from stains.
3. Clean the Rails: Before applying grease, it’s essential to clean the garage door rails thoroughly to remove any dirt, debris, or old lubricant buildup. Use a clean rag or cloth dampened with soapy water to wipe down the rails, paying particular attention to the areas where the rollers make contact.
4. Apply the Grease: Shake the can of white lithium grease or silicone-based lubricant thoroughly to ensure proper mixing. Then, spray or apply a generous amount of grease to the garage door rails, focusing on the areas where the rollers make contact. Be sure to apply the grease evenly along the entire length of the rails to ensure smooth operation.
5. Work the Grease In: Once the grease has been applied, use your hand or a clean rag to work the grease into the rails thoroughly. Move the garage door up and down a few times to distribute the grease evenly along the rails and ensure that it penetrates the rollers and bearings.
6. Wipe Off Excess Grease: After working the grease into the rails, use a clean rag or cloth to wipe off any excess grease or drips. This will help to prevent the grease from attracting dirt and debris and keep the garage door rails clean and free from buildup.
7. Test the Garage Door: With the rails properly greased, test the operation of the garage door to ensure that it opens and closes smoothly and quietly. Listen for any unusual noises or resistance as the door moves along the rails, as this may indicate areas that require additional lubrication or adjustment.
8. Repeat as Needed: Depending on the climate and frequency of use, you may need to grease the garage door rails every six months to a year to maintain optimal performance. Repeat the greasing process as needed to keep the rails lubricated and the garage door operating smoothly.
9. Inspect Regularly: Make it a habit to inspect the garage door rails regularly for signs of wear, damage, or excessive buildup. Look for any rust, corrosion, or visible damage to the rails or rollers, and address any issues promptly to prevent further damage and ensure safe and reliable operation of the garage door.
10. Consider Professional Maintenance: If you’re unsure about how to grease the garage door rails or if you encounter any issues during the process, consider hiring a professional garage door technician to perform the maintenance for you. A qualified technician can inspect the door, lubricate the rails, and address any other issues to ensure optimal performance and longevity of your garage door system.
Garage Door Repair Oklahoma City OK By following these steps and taking the necessary precautions, you can keep the rails properly lubricated and prolong the life of your garage door system. Regular maintenance and inspection of the rails will help to prevent issues and ensure safe and reliable operation of your garage door for years to come.
CCM Overhead Doors
1000 NW 80th St, Oklahoma City, OK 73114, United States
1-405-563-8982
