Rewinding a Springtown Garage Door Repair can be a challenging task that requires precision and caution.
It’s important to note that adjusting or rewinding garage door springs can be dangerous, and if you’re not comfortable with this task, it’s recommended to seek professional help. However, if you feel confident in doing it yourself, here’s a detailed guide on how to rewind a garage door spring.
: Gather Necessary Tools and Materials
Before you start, make sure you have all the required tools and materials. This typically includes winding bars, a ladder, safety glasses, gloves, and a socket wrench set.
: Identify the Type of Spring
There are two main types of garage door springs: torsion springs and extension springs. Torsion springs are mounted above the door and are wound up using a winding mechanism. Extension springs are mounted on either side of the door and extend when the door is closed. Identify the type of spring you have before proceeding.
: Release Tension on the Spring
For safety reasons, it’s crucial to release tension from the spring before attempting to rewind it. If you have a torsion spring, use winding bars to unwind it until there is no tension left. If you have extension springs, open the door and secure it in the open position using clamps.
: Remove the Old Spring
Once the tension is released, carefully remove the old spring. Use a socket wrench to loosen and remove the bolts securing the spring in place. Keep in mind that the spring will still have some weight, so handle it with care.
: Measure the Old Spring
Before winding the new spring, measure the length of the old spring, including the coils. This will help you determine the number of turns needed to achieve the proper tension.
: Install the New Spring
Place the new spring on the torsion tube and secure it with the necessary hardware. Make sure it is centered and aligned properly.
: Begin Winding the Spring
Using winding bars, begin winding the spring in the direction specified by the manufacturer. Refer to the measurements you took earlier to ensure you wind the spring the correct number of turns. Take your time and be cautious throughout this process.
: Test the Door
After winding the spring, carefully remove the winding bars and test the door. Open and close it a few times to ensure smooth operation. If the door feels unbalanced or there are any unusual sounds, stop immediately and reassess the tension on the spring.
: Make Adjustments if Necessary
If the door is not operating as expected, you may need to make adjustments to the spring tension. Refer to the manufacturer’s instructions for guidance on making minor adjustments.
: Final Safety Checks
Perform a final safety check to ensure all bolts and hardware are securely tightened. Double-check the tension on the spring and make any necessary adjustments.
Remember, safety is paramount when working with Springtown Garage Door Repair. If you’re unsure or uncomfortable with any step of the process, it’s best to consult with a professional garage door technician to avoid accidents or injuries.
Springtown Gates & Garage Doors
104 Adalida Ln, Springtown, TX 76082, United States
1-817-631-1036