Disabling the safety sensors on a Chamberlain Bedford Gates & Garage Doors opener is not recommended, as these sensors are a crucial safety feature that prevents the door from closing if an object or person is detected in the door’s path. Tampering with or disabling these sensors can pose a significant risk of injury or damage. Instead of disabling the sensors, it’s better to address any issues with them to ensure proper and safe operation. If you’re experiencing problems with your garage door sensors, consider troubleshooting and fixing the issue rather than disabling them.
Here’s a guide on troubleshooting and fixing common sensor problems:
Materials You’ll Need:
- Ladder
- Cleaning cloth
- Screwdriver
- Level
- Safety goggles and gloves
Step-by-Step Guide:
1. Check for Obstructions:
- Make sure there are no obstructions, debris, or objects blocking the sensors’ line of sight. If something is in the way, the door won’t close.
2. Clean the Sensors:
- Dust, dirt, or cobwebs on the sensors can disrupt their function. Use a clean cloth to gently wipe the sensors’ lenses to ensure they’re clean and free from any debris.
3. Verify Alignment:
- The sensors need to be properly aligned for them to work correctly. Use a level to ensure that both sensors are perfectly aligned with each other. Adjust them if needed.
4. Check the Wiring:
- Inspect the wires connecting the sensors to the garage door opener. Ensure they are securely connected and not damaged. Repair or replace any damaged wires.
5. Test the Sensors:
- Activate the garage door opener to close the door. While the door is closing, wave an object (not your hand) between the sensors to break the beam. The door should stop and reverse direction immediately.
6. Adjust Sensor Height:
- If the door doesn’t reverse when an object breaks the beam, adjust the sensor’s height. Raise or lower the sensors slightly and retest until the door reverses as it should.
7. Check the Indicator Lights:
- Most Chamberlain garage door openers have indicator lights on the sensors. If the lights are off or blinking, it indicates a problem. Consult the user manual to interpret the indicator light codes.
8. Inspect the Wiring:
- Check the wiring connections between the sensors and the garage door opener. Ensure they’re properly connected and not damaged. Replace any damaged wires.
9. Reset the Sensors:
- Some Chamberlain garage door openers allow you to reset the sensors by unplugging the opener and then plugging it back in after a few minutes. Consult your user manual for specific instructions.
10. Test the Door:
- After troubleshooting and addressing any issues, test the garage door to ensure that the sensors are working correctly. The door should stop and reverse when an object breaks the sensor beam.
11. Seek Professional Help (if needed):
- If you’ve tried troubleshooting and the sensors still aren’t functioning correctly, or if you’re not comfortable performing the troubleshooting steps, consider seeking help from a professional garage door technician.
Conclusion:
Instead of disabling the safety sensors on your Chamberlain Bedford Gates & Garage Doors opener, focus on troubleshooting and fixing any issues with the sensors. These sensors play a vital role in preventing accidents and ensuring safe operation. By following the steps outlined above and addressing any sensor-related problems, you can maintain the safety and functionality of your garage door opener system.
Bedford Gates & Garage Doors
2201 Harwood Rd, Bedford, TX 76021, United States
1-817-886-3064