Changing the code on your Overhead Garage Door Repair Rockwall TX door keypad is a simple process that enhances the security of your home.
By following these steps, you can easily update the access code to your garage
1. Locate the Keypad: Find the keypad mounted outside your garage door. It’s usually positioned near the entrance, either on the wall beside the door or directly on the garage door frame.
2. Enter the Current Code: Begin by entering your current access code on the keypad. This code grants you access to the programming mode. If you’re unsure of the current code or it doesn’t work, you may need to reset the keypad to its default settings before proceeding.
3. Enter Programming Mode: After entering the current code, locate the “Program” or “Learn” button on the motor unit of your Overhead Door garage door opener. Press and release this button within 30 seconds of entering the current code. The indicator light on the opener unit should flash, indicating that it’s ready to accept a new code.
4. Choose a New Code: Select a new access code for your garage door keypad. Ensure it’s a memorable combination that’s easy for you to remember but difficult for others to guess. Avoid using common or sequential codes for improved security.
5. Enter the New Code: Enter the new access code on the keypad within 30 seconds of pressing the “Program” or “Learn” button on the opener unit. Some keypads may require you to press a specific button (e.g., “Enter” or “Learn”) after entering the new code to confirm the programming.
6. Test the New Code: Test the new access code by entering it on the keypad and pressing the “Enter” or “Open” button. The garage door should respond by opening or closing, confirming that the new code has been successfully programmed.
7. Repeat if Necessary: If you have multiple garage door keypads or if you’re changing the code on multiple doors, repeat the programming process for each keypad following the same steps outlined above.
8. Secure the Keypad: After programming the new code, ensure that the keypad is securely mounted and that all buttons are functioning correctly. Check for any signs of damage or wear and replace the keypad or batteries as needed.
9. Keep the Code Secure: Once you’ve changed the code, keep it confidential and only share it with trusted individuals. Avoid writing down the code or sharing it with others to maintain the security of your garage.
10. Reset if Necessary: If you encounter any issues or if the new code doesn’t work as expected, you may need to reset the keypad and reprogram it from scratch. Refer to the manufacturer’s instructions or contact Overhead Door for assistance with resetting the keypad.
By following these straightforward steps, you can easily change the access code on your Overhead Door Garage Door Repair Rockwall TX keypad, ensuring the security of your garage and home. If you encounter any difficulties during the programming process, consult the keypad’s instruction manual or contact Overhead Door for further assistance.
BH Garage Doors and Gates
4035 N Goliad St, Rockwall, TX 75087, United States
1-214-206-5231
https://maps.app.goo.gl/iYdGkyhiGAiUXN3G7